Remote control: robotics project brief
Describe transmitter input and receiver behaviour separately. Test lost-connection behaviour in a supported stationary setup before adding movement, and document how the experiment is stopped.
By CYOBot · Updated
Before you start
A compatible model and the required display, inputs, sensors or actuators. Consult the model repository and instructor before adding parts.
This project brief accompanies an existing CYOBot demonstration. It explains how to plan an experiment; it is not a complete firmware tutorial or proof of a physically validated build for every model.
Use the documented example for your exact hardware as the baseline. Keep logic tests separate from physical tests, and record which results were simulated and which were observed on your robot. Private workspace lessons may provide additional instructions.
Try a small experiment
- Check the model and component compatibility in the official documentation.
- Describe transmitter input and receiver behaviour separately. Test lost-connection behaviour in a supported stationary setup before adding movement, and document how the experiment is stopped.
- Keep a working baseline and change one requirement at a time.
- Record the code version, input, expected result, actual result and unresolved faults.
What to record
Document a small remote control experiment with a clear requirement, observations and limitations.